How To Make DIY Shampoo Bar Recipes Without Using Lye (2024)

DIY Shampoo bars are my new obsession. I know I have many of them; please don’t judge me. But this sulphate-free shampoo bar recipe is natural and perhaps the best and the easiest recipe so far.

If you’ve made a shampoo bar after trying to make liquid shampoo, you’ll know what I’m talking about.Honestly, I’m unsure if I’ll ever go back to making liquid shampoo. So, let’s dive into why I rate this unassuming hair product so highly.

Jump to How-To Jump to Video

Table Of Contents Hide

What Are DIY Shampoo Bars?

Why Make A Shampoo Bar Recipe Without Lye

Homemade Shampoo Bars and pH

Ingredient Spotlight: Shampoo Bar Recipe Secrets!

Surfactants/Detergents

Coconut Oil

Powdered Agents

Fragrance

Important Notes

Substitutions

How To Use A Shampoo Bar

Final Thoughts

Try This Shampoo Bar With Castor Oil

How To Make DIY Shampoo Bar Recipes Without Using Lye (1)

What Are DIY Shampoo Bars?

Shampoo bars are exactly what they sound like, a solid shampoo. They look like soaps, but they’re anything but true soaps. They’re actually a combination of oils, detergents, and powdered ingredients to create a stiff bar that has a gorgeous, creamy lather.

Homemade shampoo bar recipes also give you the opportunity to get creative. Provided you’ve got the ratio right, you can use whatever oils, extracts, and additives you want. Liquid shampoo, however, is another story. The viscosity of the finished product is vitally important but also super volatile, being influenced by many different ingredients in unexpected ways.

This is further complicated by the fact that liquid shampoos can be surprisingly difficult to intentionally thicken if they’re too thin. This is especially true if you’re trying to formulate naturally. There’s just way less room for experimentation, improvisation, and creativity when formulating new recipes.

So, that’s why I’m obsessed, and I encourage you to learn how to make shampoo bars, especially if you’ve tried liquid shampoo making and found it hard going.

Why Make A Shampoo Bar Recipe Without Lye

It’s important to remember that shampoo bar recipes without lye are not the same as soap making. I know, I know, I’ve seen saponified soaps being touted as excellent shampoo bars, too. But experience has taught me cold process shampoo bar recipes are not good, and let me tell you why.

Saponified soaps are very high in pH. They’re literal anionic surfactants, which, when applied to the hair, can cause many kinds of problems. Chief among them is increased sensitivity and dryness of the scalp and hair that is brittle and more prone to damage and split ends.

So, avoid using actual soap on your hair. Trust me, a shampoo bar recipe without lye is easier to make anyway.

How To Make DIY Shampoo Bar Recipes Without Using Lye (2)

Homemade Shampoo Bars and pH

pH is less of an issue when we make shampoo bars. If you opt for the surfactants in my recipe below, it’s unlikely your bars will be too high in pH for your scalp or hair. This is because I’ve opted for mild, low-pH surfactants. I’ve done this for two reasons.

Right off the bat, they’re just better for your hair. I don’t want to put excessively strong detergents in my hair if I don’t have to, so why should you? But it’s also because testing the pH of your shampoo bars can be a bit annoying if you want to use something else.

Because our bars are solids, you’ll need to take a small piece and dilute it in distilled water. Then, test it using a universal indicator strip or a pH testing meter. If you find that it’s too high, then the bar is ruined, and you have to start again (with a bit of citric acid added as a pH modifier).

But don’t worry, you don’t have to do that, provided you opt for my choice of surfactants. For those of you who do want to get creative, I’ll give you some guidance below on how to go about substituting and properly pH testing.

Ingredient Spotlight: Shampoo Bar Recipe Secrets!

Surfactants/Detergents

How To Make DIY Shampoo Bar Recipes Without Using Lye (3)

We’re using two different surfactants for this recipe: powdered and liquid. First up, let’s talk about our powdered SCI.

Sodium Cocoyl Isethionate Powder, or SCI for short, is a natural mild surfactant that is known for its mild cleansing properties, helping to remove dirt and oils without irritating the scalp.

It also produces a rich and stable lather with great foaming properties. SCI is a great stand-alone surfactant, giving the finished product a good pH level.

I’ve been having a lot of fun with this ingredient lately, and honestly, it’s perfect for this formulation. But I wanted to include a co-surfactant to help improve the lather of the bar. I went for Cocamidopropyl Betaine.

It’s the perfect choice for this formulation! It’s super gentle, so it won’t make the bar more irritating (which is a problem with many different surfactants)

Coconut Oil

Coconut oil is our main moisturizing agent for this formulation, and it’s a great choice. Firstly, it will lend some stiffening power, as coconut oil is a solid at room temperature. But honestly, I’ve included it mostly because of how great it is for the hair.

You’re probably no stranger to this ingredient. Still, for anyone who doesn’t know, coconut oil is packed full of moisture and nourishment for your hair. Its nourishing qualities will help combat split ends, control frizz, add shine, and prevent further damage.

Powdered Agents

How To Make DIY Shampoo Bar Recipes Without Using Lye (4)

Our powdered ingredients are actually more important than you think. They’re vital for the structure of your bar. Without them, they wouldn’t harden, and they’d be difficult to use in the shower. In fact, they’d melt in your hand like bath truffles!

For this formula, I’ve selected arrowroot powder and coconut milk powder. Coconut milk powder synergizes with our coconut oil, as it’s intensely hydrating and provides great nutrients for the hair. It can actually penetrate into the hair shaft to provide moisture deep into the roots of your hair.

Arrowroot powder, however, is mostly there to help keep our bar solid, but it does provide a more creamy texture to the finished bar.

Fragrance

This one is totally optional, as you don’t actually need to have one at all! But It’s nice to have a lovely fragrance that you like to be imparted onto the hair when it’s washed.

I opt for an essential oil every time. They just smell better to me, and I love how long-lasting they are in my hair. For this recipe, I went for distilled lime essential oil, which not only smells gorgeous but also provides some anti-microbial action.

You can, of course, use a fragrance oil if you prefer. There are some aromas that you just can’t get as an essential oil. If you want your homemade shampoo bar to smell like chocolate chip cookies, you’ll want a fragrance oil!

Important Notes

  • This shampoo bar can be used as an all-over soap as well as a shampoo bar.
  • To check the pH. Unfortunately, the bar needs to be solid, so you shave 1g from it and dissolve it in 9g water. Adjust the sample if needed (5 to 6pH), then multiply this by the bar’s weight. In this case, the bar is 100g, so if the sample needs to be adjusted by 0.002, we could multiply this by 100 = 0.2, so we would add 0.2g of citric acid to the next bar we make.
  • You must wear a face mask whilst working with powder surfactants.

Substitutions

  • Sodium Cocoyl Isethionate Powder (SCI powder): We don’t recommend substituting the SCI surfactant as the bar may end up too soft and the pH of the finished bar could be too high.
  • Arrowroot Powder: Another starchy powder, such as cornstarch or rice starch, should work.
  • Coconut Milk Powder: Powdered cows milk would be a good substitute.
  • Allantoin Powder: Panthenol powder, or aloe vera powder at a lower rate (0.25g)
  • Coconut oil: Any other carrier oil you have to hand.
  • Cocamidopropyl Betaine: Coco glucoside or decyl glucoside would be a decent substitute but they have a higher pH so the formula would need to be adjusted. Add around 0.25g of citric acid with the dry ingredients. This should keep the shampoo bar at a good pH range.
  • Lime Essential Oil: You could use another essential oil.

How To Make DIY Shampoo Bar Recipes Without Using Lye (5)

How to make shampoo bars – Coconut & Lime Recipe

This DIY shampoo bar works wonders on my hair. And if you get yourself a beautiful mold, you’d be surprised how sophisticated and luxurious these little bars can look.

Rate This Project

5 from 5 votes

Print Comment Pin

Prep Time: 5 minutes minutes

Active Time: 25 minutes minutes

Total Time: 30 minutes minutes

Yield: 100 g

Difficulty Level: Easy

Author: Angela Wills

As an Amazon Associate, I earn from qualifying purchases. If you buy via the links here I may earn a small affiliate commission at no cost to you.

Ingredients

Wet Ingredients

Video

Instructions

  • Before you start making shampoo bars be sure to put on your face mask. Then, place all your drying ingredients into a bowl and stir.

    53 g Sodium Cocoyl Isethionate Powder, 15 g Arrowroot Powder, 5 g Powdered Coconut Milk, 1 g Allantoin Powder

    How To Make DIY Shampoo Bar Recipes Without Using Lye (6)

  • Weigh the coconut oil into a heat-proof container. Melt the coconut oil in the microwave or by placing the beaker into a water bath to melt and remove it once it has melted.

    10 g Coconut Oil

    How To Make DIY Shampoo Bar Recipes Without Using Lye (7)

  • Add the Cocamidopropyl Betaine, the lime essential oil, and the preservative to the melted coconut oil. Stir to combine.

    14 g Cocamidopropyl Betaine, 1 g Lime Essential Oil

    How To Make DIY Shampoo Bar Recipes Without Using Lye (8)

  • Now it’s time to combine our dry and wet ingredients. So go ahead and sprinkle the wet ingredients into the dry ingredients.

    How To Make DIY Shampoo Bar Recipes Without Using Lye (9)

  • Use the spatula to bring the ingredients together. You are looking for a crumble-type consistency.

    How To Make DIY Shampoo Bar Recipes Without Using Lye (10)

  • Once you have the correct consistency that is not too sticky so that it sticks to your hands, you can use your hands to bring it all together. Give it a good knead to ensure everything has been fully incorporated and you have the consistency of play dough. If the dough is too sticky, you could add more arrowroot powder or more glycerine if it is too dry.

    How To Make DIY Shampoo Bar Recipes Without Using Lye (11)

  • When you have a good, flexible dough, start filling the mold. Make a single bar or split the mixture into two 50g bars. I like to push the shampoo dough in a bit at a time to make sure it is getting into all the corners and sides. If you prefer, you can just place the whole dough ball in and give it a good squish down.

    How To Make DIY Shampoo Bar Recipes Without Using Lye (12)

  • For a smoother finish, try placing a piece of wax paper over the dough and smoothing it down with the palm of your hand. Then, place the mold into the freezer for a couple of hours to harden. After a couple of hours in the freezer, the shampoo bar should be hard enough to remove it from the mold.

    How To Make DIY Shampoo Bar Recipes Without Using Lye (13)

  • Once the shampoo bar has hardened, you can remove it from the mold. You will notice that it will soften slightly once it has defrosted. The shampoo bar will need to dry out and harden for a good few days before you can use it. I found most bars take around a week before they are ready.

    How To Make DIY Shampoo Bar Recipes Without Using Lye (14)

Notes

Important:

  • This shampoo bar can be used as an all-over soap as well as a shampoo bar.
  • To check the pH. Unfortunately, the bar needs to be solid, so you shave 1g from it and dissolve it in 9g water. Adjust the sample if needed (5 to 6pH), then multiply this by the bar’s weight. In this case, the bar is 100g, so if the sample needs to be adjusted by 0.002, we could multiply this by 100 = 0.2, so we would add 0.2g of citric acid to the next bar we make.
  • You must wear a face mask whilst working with powder surfactants.

Category: DIY Bath & Body

Cuisine: N/A

Difficulty: Easy


Tried This ProjectMention @savvyhomemade or Tag me! #savvyhomemade

How To Use A Shampoo Bar

The most important thing to do first is to let your DIY Shampoo bars harden. Right after we pull them out of the mold, they are much too soft to use and will melt very quickly in the shower or bath. So, just a few days of patience is all we need to get it ready for the hot water.

Once they are ready to use, simply take one into the bath or shower with you. When you’re ready to wash your hair, lather your shampoo bar between your fingers before rubbing it against the roots and then to the tip of your hair.

When you have enough foam, put the bar to one side and massage the scalp, making sure to disrupt dead skin cells and dandruff. Rinse, then repeat if necessary.

After your shower, make sure your shampoo bar isn’t sitting in a puddle of water and that it is left to dry properly for your next use.

Final Thoughts

If you’re reading this and have never made a shampoo bar before, then you gotta try this recipe. If you have, you’ll know how easy they are to make! And how great they are at keeping your hair sparkling all week long!

I just love how these turned out. Not only do they work wonders on my hair, but they look fantastic as well. If you get yourself a beautiful mold, you’d be surprised how sophisticated and luxurious these little bars can look!

But of course, I encourage you to experiment with this recipe. While I wouldn’t play around with the surfactants, I would totally switch out the butter and try something else. Do keep in mind that if you choose a very soft butter, you may see a change in the hardness of your bars.

I hope this has inspired you to try your hand at your own super easy, lye free shampoo bars. While I’ve always sung the praises of a good quality homemade shampoo bar, this recipe makes it so simple that there’s really no reason not to try it!

Try This Shampoo Bar With Castor Oil

I’ve opted to use Castor Oil for this recipe. Castor is a great carrier oil that has amazing properties for your hair. It helps to improve blood flow to the scalp, which can boost hair growth for thicker, more voluminous hair.

Shampoo Bar With Castor Oil →

Share on FacebookShare on PinterestShare on X (Twitter)Share on Reddit Share on Flip it

You May Also Enjoy:

  • Easy DIY Dry Shampoo Recipe with Cornstarch – Refresh Hair Between Washes
  • Dry Shampoo For Dark Hair Or Colored Hair
  • My Homemade Baking Soda Dry Shampoo
  • My DIY Arrowroot Powder Dry Shampoo
How To Make DIY Shampoo Bar Recipes Without Using Lye (2024)

FAQs

How To Make DIY Shampoo Bar Recipes Without Using Lye? ›

SLSa (Sodium Lauryl Sulfoacetate)

A powder used to make shampoo bars as it creates a foaming lather. SLSa is derived from coconut oil and creates a lather that gently removes surface oil, dirt and bacteria without stripping or drying sensitive skin.

What ingredient makes shampoo bars lather? ›

SLSa (Sodium Lauryl Sulfoacetate)

A powder used to make shampoo bars as it creates a foaming lather. SLSa is derived from coconut oil and creates a lather that gently removes surface oil, dirt and bacteria without stripping or drying sensitive skin.

How do you harden a shampoo bar? ›

The last thing to do is to let the shampoo bar dry out and harden. I like to pop it in in the freezer for about an hour or leave it to harden over night. To make the shampoo bar last even longer, leave it to harden for a week. Although, I can never wait that long!

How do you make a shampoo bar with sodium cocoyl isethionate? ›

DIY Shampoo Bar Recipe:
  1. 100g Sodium Cocoyl Isethionate (SCI) (powder or noodles)
  2. 20g Coconut Oil.
  3. 20g Shea Butter.
  4. 10g Jojoba Oil.
  5. 10g Castor Oil.
  6. 20g Distilled Water.
  7. 5-10 drops Essential Oil (optional, for fragrance)
Dec 30, 2023

Can I make shampoo bars without lye? ›

Shampoo Bar Recipe without Lye*
  1. 1 lb. castile soap melt and pour base.
  2. 2 tsp. Castor oil or jojoba oil.
  3. 1 tsp. Shea butter or cocoa butter.
  4. 25 drops of essential oils (see below for tips on which essential oils to use)
May 27, 2022

What are the best ingredients for shampoo bars? ›

Make sure your shampoo bar contains lots of hair loving ingredients, or else it will just be a brick of surfactants. Look, for example, for coconut oil, cocoa butter, shea butter, argan oil, avocado oil, and jojoba. Clays, such as rhassoul clay and bentonite clay, are also amazing for haircare.

How do you make shampoo bars for beginners? ›

Melt carnauba wax in a double boiler. Once melted, let cool slightly and add apple cider vinegar, jojoba beads, essential oils, and Castile soap. Stir completely. Pour mixture into soap mold of choice.

What ingredient makes soap lather more? ›

Coconut oil is a very popular ingredient in soap making because of the luxurious lather it creates.

What ingredient makes shampoo soapy? ›

The most common foaming agents used in personal care are chemicals sodium laureth sulfate (SLES), sodium lauryl sulfate (sometimes referred to as sodium dodecyl sulfate or SLS) and coco-glucoside.

What makes a shampoo bar solid? ›

Put simply, an Ethique shampoo bar is a highly concentrated solid version of your favourite liquid shampoo product. A shampoo bar contains little to no water meaning you're left with only the active ingredients. Contrast this with a liquid shampoo, which is typically 70-80% water.

Why is my hair sticky after using a shampoo bar? ›

But in hard water areas, the soap can bind to the minerals in the water and can stick to your hair, leaving that waxy residue that many know all too well. Some don't mind this feeling, and find it improves after a few weeks, but if you're not a fan then it's likely you need to try a surfactant-based bar.

What does sodium lactate do in shampoo bars? ›

In any shampoo, we want to include ingredients like hydrolyzed proteins or amino acids to form a very light, hydrating film on the hair strand, humectants like glycerin or sodium lactate to draw water from the atmosphere to hydrate, essential or fragrance oils, and preservatives to keep the product safe from ...

What can I use instead of sodium cocoyl isethionate powder? ›

If you'd like to learn more about the surfactants used and compare them to ones you might already have so you can make substitutions, check out this page and read this FAQ. My first choice for an alternative to Sodium Cocoyl Isethionate (SCI) would be Sodium Lauryl Sulfoacetate (SLSa).

What is a substitute for sodium cocoyl isethionate sci? ›

Two options to consider would be SLSa and Sodium (C14-16) olefin sulfonate (Bio-Terge AS90). Wear a dust mask!

How do you make a glycerin shampoo bar? ›

Chop your glycerin soap base into 1-inch chunks, then measure out 1 cup. Melt the soap base on medium heat, stirring frequently to prevent burning. Once melted, remove from the heat and add 3 Tbsp. jojoba oil, 1 to 2 drops of rosemary, tea tree, and tamanu essential oils.

Are shampoo bars better for your hair? ›

Shampoo bars are very good for your hair. Most shampoo bars don't contain detergent based ingredients, sulphates or parabens, unlike liquid shampoos. Traditional liquid shampoos that many of us grew up using contain harsh chemicals. These can strip the hair of its natural oils, causing hair to become dry and brittle.

Can you use melt and pour soap to make shampoo bars? ›

While advanced soap- and shampoo-makers use sodium hydroxide to make their shampoo bars, you can start your DIY shampoo bar journey by using a melt-and-pour soap base.

How do you make stripping shampoo? ›

DIY Clarifying Shampoo Recipe

Spoon baking soda into an empty water bottle or cup, then add water. (Note: Water must be warm, for baking soda to fully dissolve.) This mixture will not create suds or lather, but if you really feel the need for a foamy wash, you can add apple cider vinegar, too.

Top Articles
Latest Posts
Article information

Author: Mr. See Jast

Last Updated:

Views: 6143

Rating: 4.4 / 5 (75 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Mr. See Jast

Birthday: 1999-07-30

Address: 8409 Megan Mountain, New Mathew, MT 44997-8193

Phone: +5023589614038

Job: Chief Executive

Hobby: Leather crafting, Flag Football, Candle making, Flying, Poi, Gunsmithing, Swimming

Introduction: My name is Mr. See Jast, I am a open, jolly, gorgeous, courageous, inexpensive, friendly, homely person who loves writing and wants to share my knowledge and understanding with you.